|
|
Build Your Online Product Catalogs?
| Product Name: |
Gas Turbine
|
| Supply Ability: |
10000sets |
| Related proudcts |
200kw gas generator, |
| Specifications |
200kw Gas Generator |
| Price Term: |
FOB |
| Port of loading: |
Shenzhen |
| Minimum Order |
1set |
| Unit Price: |
negotiate |
|
Technical Parameters
Name of Parameter Value of Parameter
Model of the set 200GF-RG 200GF-PwG
Model of gas engine G6190ZLDK-2A
Model of generator 1FC6 354-6LA42
Rated power(kW) 200
Rated current(A) 288
Rated voltage(V) 400
Rated frequency(Hz) 50
Rated rotated speed(r/min) 1000
Rated power factor(cosφ ) 0.8(lag)
The number of phase and the wiring method Three coils wired by three phase lines or three coils wired by three phase lines and one zero line.
Way for adjusting pressure Automatic adjusting pressure
Excitation method Brushless excitation
Starting up method 24VDC Electric starting system
Technical Parameters
Name of Parameter Value of Parameter
Model G6190ZLDK-2A
Number of cylinder 6
Arranging way of cylinders Straightly arranged
Diameter of cylinder(mm) 190
Route(mm) 210
Total displacement(L) 35.73
Air inflow way Increasing the pressure by using the exhaust produced by the generator to promote the operation of the turbine, thus improve the inlet pressure. The intercooler for air inflow is also used.
Rated power(kW) 210
Rated rotate speed(r/min) 1000
Min. Stable rotate speed with empty load(r/min) 600
Dimension(L× B× H) (mm) 3226× 1120× 2005
Net weight(kg) 4500
Conditions for Using
1. Temperature of the straw gas should not surpass 40temp when it is 1m or nearer to the pressure regulating valve for air inflow.
2. The pressure that this biomass generator set can sustain ranges from 3kPa to 10 kPa and the fluctuated frequency of the pressure should not surpass 1kPa/min.
3. The granularity of the impurity should not surpass 5 μ M and its max. Content is 30mg/Nm3.
4. For the straw gas used in this biomass generator set, the volume content of H2 should not surpass 20% and the max. Content of H2S, NH3 and tar are 50mg/Nm3, 20mg/Nm3, and 50mg/Nm3.
5. The moisture content in straw gas should not surpass 40g/Nm3 and the heating value of the gas should not be lower than 4MJ/Nm3.
For gas that cannot reach the conditions above, special allocation |
| Company: |
Shengdong New Technology CO.,Ltd
|
| Contact: |
Mr. Eric Lee |
| Address: |
Huangjinji Industrial Zone,Qishi Town |
| Postcode: |
|
| Tel: |
+86-769-86728867 |
| Fax: |
+86-769-86729611 |
| E-mail: |
|
|
|
|
Home
